Cabling tester for network, telephone, coax cabling as well as determining the cable length and distance to the fault
The CableMaster 600 is a professional cable tester to test network, telephone and coax cabling. Equipped with an RJ45 jack for network cables and an F-type connector for coax cables, the CableMaster 600 tests wire map, determines the cable length and distance to the fault. Test results can be saved and documented using the PC-based reporting software. The CableMaster 600 offers a multitude of functions for trouble-shooting including cable tracing, link detection up to 1Gb/s, PoE tests and port/outlet identification with ID remotes.
The CableMaster 600 is perfectly suited for professional installers and network operators who are challenged with testing network (RJ45) and coax cabling, verifying the correct wiring, determining cable lengths and documenting all this in test reports.
The CableMaster 600 professional cabling tester is highly versatile – whether during installation, verifying which outlet is connected to the appropriate port in the patch panel, or after installation, for quality testing and documentation of the cabling, or for in-service trouble-shooting of the network.
The test results are displayed on the full-colour graphic screen in a clear and easy to understand way, they can be saved in the device and be exported to the PC for evaluation and documentation with the free eXport PC reporting software.
The CableMaster 600 features extensive test capabilities for RJ45 network, telephone and coaxial cable testing. Consisting of a main unit and a network/tel testing and ID remote, the CableMaster 600 is the ideal tool to test RJ45 cabling displaying the results in a wire map format. It verifies continuity, tests for reversals, miswires, split pairs, shorts, and opens. The cable length and the distance to the open will be determined using the integrated TDR (Time Domain Reflectometer).
The CableMaster 600 features an integrated tone generator to send a modulated audible signal into the cable which is detected by an optional tone probe used for cable tracing (unscreened unlabeled cables) and outlet/port identification. Cable ID remotes enable the user to identify which outlet is connected to the appropriate port in patch panel.
The CableMaster 600 enables a rapid identification of network ports/outlets while displaying the link capability and the current link status. In addition, PoE (Power over Ethernet) presence is detected and displayed and can be tested with a load test compliant with IEEE 802.3 af/at.
Save and Report
Cable test results can be saved in the main unit and be exported to the PC-based eXport reporting software via the included USB cable. eXport is the central reporting software to create professional test reports that also supports other Psiber measurement and test instruments.
- Tests network and coaxial cables (RJ45 jack and F connector)
- Displays wire map in graphical format for rapid trouble-shooting
- Determines cable length and distance to the cable fault performing a full TDR measurement
- High resolution color display for excellent readability in any environment
- Generation of test reports and documentation with PC-based reporting software
- Extensive test and fault finding capabilities such as: Cable tracing/port identification using a tone probe, PoE detection and testing, Link test up to 1 Gb/s, Outlet/port identification with ID remotes
Measurement Technology Time Domain Reflectometry (TDR)
Cable Measurements Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)
Supports 8 continuity and ID numbers remotes (RJ 45)
Supports 20 RJ 45 and 20 F connector ID only remotes
Power over Ethernet Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE)
Active Ethernet Indicates advertised speeds of 10/100/1000 base-t half or full duplex
Can Link to network at 10/100 base-t
Maximum Voltage Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester
RJ Jack: 66 Vdc or 55 Vac
F-connector: 50 Vdc or Vac
Save Test Results Stores up to 250 Cable or network tests with user defined names
Tone Generation Tone Frequencies: 730 Hz and 1440 Hz
Languages English, French, German, Spanish
Battery Life For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typical
Standby – 1.5 years typical
(200 uA max standby current), Batteries are included
Altitude 10.000 ft (3048 m) operating
Temperature Operating: 32 to 122°F (0 to 50°C)
Storage -22 to 140°F (-30 to 60°)
Humidity 10 to 90% non-condensing
Enclosure High-strength PC/ABS plastic with VO rating with boot
Withstands 4 foot drop on to concrete
Size 1.85″H x 3.6″W x 6.8″L (4.7 x 9.15 x 17.3 cm)
Weight With batteries: 1 lb 2 oz (510 g)
Safety Compliances CE
- Brand: Psiber Data
- Product Code: CABLEMASTER600
- Availability: 5 - 7 Days